You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.
Can you have more than one dimmer switch on the same circuit?
You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.
How do you wire two dimmer switches in the same box?
- Choose a dual dimmer control style. …
- Cut off the power supply running through the circuit that feeds the box. …
- Remove the existing switch. …
- Identify and mark the hot wire. …
- Unscrew the terminals and remove the wires from the old switch.
Can a circuit have two switches?
Two way switch can be operated from any of the switch independently, means whatever be the position of other switch(ON/OFF), you can control the light with other switch. There are two methods of making 2-way switching connection one is 2-wire control and another is 3-wire control.
Do dimmer switches require special wiring?
Remember: Dimmer switches don’t work on most fluorescent fixtures, and low-voltage lighting requires special low-voltage dimmers. … Remove the wires from the old switch. Dimmer switches are usually connected to the house wiring by short lengths of wire coming out of the switch body rather than by screw terminals.
How do you make a circuit with two switches?
How Does Two Way Light Switching Work? Two way light switching works by having two wires in between the two different switches. What these two wires do is that they act as an alternate bridge point between the switches that allow them to connect the circuit to the light source from either switch. You may also read, Can you have two ectopic pregnancies at the same time?
How do I wire two lights to different switches?
You can do this light switch wiring in one of two ways. The most common is to daisy-chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a “home run” configuration. Check the answer of Can you have two ectopic pregnancies in a row?
Why does my light switch have 3 wires?
The 2 wire source feeds to an adjacent switch for a different light which then feeds this switch with 2 wires. The switch in question is a single pole. From it, there is 3 wire cable that leads to a light which then connects to other lights controlled by their own switches.
Why does my dimmer switch have two red wires?
2 Answers. It sounds as if most of the switches you have been replacing are single pole switches. That is, they make (on) or break off) a single connection from one location. Simple switches use a black (hot) and another wire, usually black, red or blue (switched hot) to make and break the circuit. Read: Can you have two first authors on a paper?
Can any light be dimmable?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. … LED fixtures, for instance, may work with standard dimmers, but some may need a specialized dimmer. Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed.
Can you change a normal switch to a dimmer?
Replacing a standard single-pole or three-way switch with a dimmer switch is no different than replacing a standard switch. … Unscrew and remove the switch plate; then use a voltage tester to make sure that the circuit is dead. Unscrew the switch from the electrical box and pull it out with the wires still attached.
How do you wire LED lights to a dimmer switch?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
Where does the red wire go on a 3-way dimmer switch?
The black hot wire connects to the far right switch’s common terminal. Red and blue wires link traveler terminals of both switches. The red wire, which is connected to the first switch’s common terminal, leads back to the fixture.
What happens if a 3-way switch is wired wrong?
Usually when a 3-way switch fails, lights can be toggled on and off at one switch, but not the other. If one of the two 3-way switches toggles the light(s) on and off, the other 3-way switch has probably failed. Follow these steps to find which switch is bad. Toggle each switch until the light come on.
What if both wires are black?
You will get a reading if one wire is hot and the other isn’t. However, if both wires are hot, the reading will be zero. … However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.
